The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 8. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 8 series. A SPST - NC switching circuit is used to build these analog multiplexers. The multiplexer consists of 1 circuits. Try searching with MAX317 if you're looking for variants. An switch multiplexer with 35Ohm internal resistance has a value of 35Ohm. You can find the functions of the 8 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. An effective Dual, Single supply digital multiplexer. A low voltage of 10V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. When the digital multiplexer is charged above 1μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 20V operating voltages for the electrical part.
MAX317ESA+ Features
1 Channels Switch Circuit: SPST - NC 1μA Supply Current
MAX317ESA+ Applications
There are a lot of Maxim Integrated MAX317ESA+ Analog Switches & Multiplexers ICs applications.