MAX319EPA+ Overview

This electronic part is conveniently packaged in 8-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 8 series. A SPDT switching circuit is used to build these analog multiplexers. A 1 circuit is present in this switch device. Use MAX319 to search for variants of the digital switches. This digital multiplexer has 35Ohm internal resistance. The functions of 8 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 30V to the switch device in normal circumstances. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 10V. In order to operate this switch device, it would need a current of 1μA. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. 20V operating voltages are supported by the electronic component.

MAX319EPA+ Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current

MAX319EPA+ Applications

There are a lot of Maxim Integrated MAX319EPA+ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• E1 Network Equipment
• DSUs
• Avionics test equipment
• Routers
• Intelligent PBX
• Signal routing between systems
• Channel Banks
• Power routing
• PDH Multiplexers