LTC1380IS#PBF Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Search with LTC1380 if you are looking for analog multiplexer variants. It has an internal resistance of 400Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Dual supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1.35V. There are 8 inputs to be operated.

LTC1380IS#PBF Features

8 Channels
10μA Supply Current

LTC1380IS#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC1380IS#PBF Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems