MAX319ESA+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 8 series. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 1 circuits. Try searching with MAX319 if you're looking for variants. As far as internal resistance is concerned, it has 35Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 10V. In order to operate this switch device, it would need a current of 1μA. A voltage higher than 100pA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIf you are using a dual power supply, you should attach at least 4.5V. This electrical part is compatible with 20V operating voltages.

MAX319ESA+T Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current

MAX319ESA+T Applications

There are a lot of Maxim Integrated MAX319ESA+T Analog Switches & Multiplexers ICs applications.

• PBXs
• Cellular phones
• Relay Replacement
• High speed data transmission line cards
• High reliability control systems
• Communication systems
• Cell phones
• Avionics
• Data Acquisition Systems
• Relay replacements