MAX349CAP+ Overview

This electronic part is conveniently packaged in 20-SSOP (0.209, 5.30mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there have been 20 terminations. A 8 channel electronic part produces high-quality output. A 5.5V voltage supply should turn on and run the electronic component. An injection of 20 pins is performed into the body of the electrical component. 1 circuits are used in this analogue multiplexer. Try searching for MAX349 variants of the analog switch ic. Analog switches have 100Ohm internal resistance. To find out what the 20 pins do, please refer to the datasheets. Users should never supply a voltage higher than 16V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. The voltage should be at least 3V if you are using dual power supplies. Operating voltages of 15V are compatible with the electrical part.

MAX349CAP+ Features

8 Channels
1μA Supply Current

MAX349CAP+ Applications

There are a lot of Maxim Integrated
MAX349CAP+ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems