MAX355EPE Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX355. This digital multiplexer has 350Ohm internal resistance. Datasheets for functions of 16 pins are available. normally, users should not supply switches with voltages higher than 36V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 4.5V. In order to operate this switch device, it would need a current of 300μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. If you are using a dual power supply, you should attach at least 4.5V. Operating voltages range from 28V.

MAX355EPE Features

4 Channels
Switch Circuit: SP4T
300μA Supply Current

MAX355EPE Applications

There are a lot of Maxim Integrated MAX355EPE Analog Switches & Multiplexers ICs applications.

• Mechanical reed relay replacement
• RGB switches
• Audio/video switches
• Cell phones
• Video signal routing
• Microprocessor controlled systems
• Medical
• Battery-powered systems
• Precision instrumentation
• Microwave transmission systems