MAX4051CSE+ Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 16 pins are injected into the electrical part body. The multiplexer consists of 1 circuits. Try searching for MAX4051 variants of the analog switch ic. Analog switches have 100Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2V. An operating current of 1μA would be sufficient for this switch device. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 2.7V should be attached. The electronic component can function from 15V.

MAX4051CSE+ Features

8 Channels
1μA Supply Current

MAX4051CSE+ Applications

There are a lot of Maxim Integrated MAX4051CSE+ Analog Switches & Multiplexers ICs applications.

• Battery Powered Systems
• Digital access cross connects
• Precision instrumentation
• Microprocessor Controlled Analog Systems
• Audio and video signal routing
• Avionics test equipment
• Industrial control systems
• Multi-Line E1 Interface Cards
• Residential Gateways, Home Gateway/Router
• Signal routing between systems