ADG5419BRMZ-RL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electrical component is included in the 8 series of products. The analog switch ics are built using SPDT switching circuits. Search with ADG5419 if you are looking for analog multiplexer variants. It has an internal resistance of 14Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 9V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 80μA. A digital multiplexer may suffer damage if voltage is applied above 55μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. In the case of dual power supplies, you should connect at least 9V. There are 1 inputs to be operated. The Drain to Source resistance of this electronic component is 23Ohm. The analog switch ics has 2 outputs.

ADG5419BRMZ-RL7 Features

1 Channels
Switch Circuit: SPDT
80μA Supply Current
-3db Bandwidth: 190MHz
Drain-to-Source resistance: 23Ohm

ADG5419BRMZ-RL7 Applications

There are a lot of Analog Devices Inc.
ADG5419BRMZ-RL7 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems