Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 3 circuits in this switch device. Look for analog switch ic variants by searching with MAX4053. This digital multiplexer has 100Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. For this multiplexer to operate, 1μA current would be sufficient. Putting voltage greater than 100nA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 8V. With dual power supplies, you should attach at least 2.7V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This electrical part is compatible with 8V operating voltages. 8-bit conductivity is possible.
MAX4053EPE Features
1 Channels Switch Circuit: SPDT 1μA Supply Current 8-Bit
MAX4053EPE Applications
There are a lot of Maxim Integrated MAX4053EPE Analog Switches & Multiplexers ICs applications.
Signal routing between systems
Audio signal routing
Video switching
High speed data transmission line cards
Precision instrumentation
SDH
Communications systems
Existing multiplexer applications (both fault-protected and nonfault-protected)