MAX4614CPD+ Overview

Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Around 0°C~70°C TA is the extended operating temperature. A total of 14 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. A total of 14 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching for MAX4614 variants of the analog switch ic. To find out what the 14 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Using a single voltage supply, this switch device consumes 2V~5.5V volts. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Additional features include: CAN ALSO OPERATE WITH 5 V SUPPLY.

MAX4614CPD+ Features

1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY

MAX4614CPD+ Applications

There are a lot of Maxim Integrated MAX4614CPD+ Analog Switches & Multiplexers ICs applications.

• SONET/SDH ADM
• Power routing
• Remote Powered Equipment
• Private Branch Exchange (PBX)
• HDTV
• Imaging
• CSU
• Avionics test equipment
• E1 Network Equipment
• Cable Telephony – NIU, Set-Top Box, Home Side Box