80ns, 30ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4522 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)
SOT-23
MAX4522ESE+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
100Ohm
Terminal Finish
Tin (Sn)
Additional Feature
ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
Subcategory
Multiplexer or Switches
Max Power Dissipation
696mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
MAX4522
Output
SEPARATE OUTPUT
Pin Count
16
JESD-30 Code
R-PDSO-G16
Operating Supply Voltage
5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
12V
Min Supply Voltage
2V
Operating Supply Current
1μA
Nominal Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
100 ns
Voltage - Supply, Single/Dual (±)
2V~12V ±2V~6V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
40 ns
Max Dual Supply Voltage
6V
On-State Resistance (Max)
100Ohm
Min Dual Supply Voltage
2V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
2pF 2pF
On-state Resistance Match-Nom
1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
80ns, 30ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-90dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
80ns
Switch-off Time-Max
30ns
Normal Position
NO
Height Seated (Max)
1.75mm
Length
9.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
MAX4522ESE+T Product Details
MAX4522ESE+T Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 16 pins. SPST - NO switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. MAX4522 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. The switch device would be able to operate with 1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. If you are using a dual power supply, you should attach at least 2V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. It can operate from 5V operating voltages. Additional features include: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4522ESE+T Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4522ESE+T Applications
There are a lot of Maxim Integrated MAX4522ESE+T Analog Switches & Multiplexers ICs applications.