MAX4541ETA+ Overview

Shipping overseas is convenient with the electronic component packed in 8-WDFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. An 5V voltage supply should allow the electrical part to be turned on and run. These analog multiplexers are built based on SPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for MAX4541 variants of the analog switch ic. This digital multiplexer has 60Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. The voltage required by this switch device is 2.7V~12V, draining from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.

MAX4541ETA+ Features

Switch Circuit: SPST - NO

MAX4541ETA+ Applications

There are a lot of Maxim Integrated MAX4541ETA+ Analog Switches & Multiplexers ICs applications.

• DSUs
• SDH/SONET multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Battery Powered Instruments
• Communication systems
• Access Concentrators
• Sample hold systems
• Ultrasound
• Audio and video routing
• Relay replacements