80ns, 30ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4522 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
MAX4522EUE+ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2003
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
100Ohm
Terminal Finish
Matte Tin (Sn)
Additional Feature
ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
Subcategory
Multiplexer or Switches
Max Power Dissipation
696mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
MAX4522
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
12V
Min Supply Voltage
2V
Operating Supply Current
1μA
Nominal Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
100 ns
Voltage - Supply, Single/Dual (±)
2V~12V ±2V~6V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
40 ns
Max Dual Supply Voltage
6V
On-State Resistance (Max)
100Ohm
Min Dual Supply Voltage
2V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
2pF 2pF
On-state Resistance Match-Nom
1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
80ns, 30ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-90dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
80ns
Switch-off Time-Max
30ns
Normal Position
NO
Height Seated (Max)
1.1mm
Length
5mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$2.920679
$2.920679
10
$2.755357
$27.55357
100
$2.599393
$259.9393
500
$2.452258
$1226.129
1000
$2.313451
$2313.451
MAX4522EUE+ Product Details
MAX4522EUE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 4. Search with MAX4522 if you are looking for analog multiplexer variants. Analog switches have 100Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2V. This digital switch can be operated with a current of 1μA. Put voltage above 1μA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. With dual power supplies, you should attach at least 2V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 5V operating voltages. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY.
MAX4522EUE+ Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
MAX4522EUE+ Applications
There are a lot of Maxim Integrated MAX4522EUE+ Analog Switches & Multiplexers ICs applications.
Imaging
RGB switches
Existing multiplexer applications (both fault-protected and nonfault-protected)