MAX4523EUE+ Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. The multiplexer consists of 4 circuits. Use MAX4523 to search for variants of the digital switches. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 1μA current would suffice. A voltage higher than 1μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. When using dual power supplies, you should attach at least 2V. This analog switch ic utilizes SEPARATE OUTPUT output. It can operate from 6V operating voltages.

MAX4523EUE+ Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX4523EUE+ Applications

There are a lot of Maxim Integrated MAX4523EUE+ Analog Switches & Multiplexers ICs applications.

• Microwave transmission systems
• Battery-powered systems
• SONET
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• High speed data transmission line cards
• Precision instrumentation
• Audio and video signal routing
• PBXs
• Communications systems
• New designs requiring multiplexer functions