MAX4526CPA Overview

The electrical component comes in 8-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. It consists of 2 circuits. Search with MAX4526 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 175Ohm. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 700μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 20VFor dual power supplies, a voltage of at least 4.5V should be attached. It is integrated with SPST analog ICs.

MAX4526CPA Features

1 Channels
Switch Circuit: SPDT
700μA Supply Current

MAX4526CPA Applications

There are a lot of Maxim Integrated MAX4526CPA Analog Switches & Multiplexers ICs applications.

• Imaging
• Remote Powered Equipment
• Microwave transmission systems
• Remote wireless modules
• PBXs
• Relay Replacement
• CSU
• Signal routing between systems
• 65 V DACs
• ATM