As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 14 terminations. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. 14 pins are injected to the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4534. Analog switches have 400Ohm internal resistance. The datasheets for the 14 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 9V. An operating current of 400μA would be sufficient for this switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 20VA dual power supply should have at least 4.5V voltage attached. 28V operating voltages can be used with this electrical part.
MAX4534EUD+T Features
4 Channels Switch Circuit: SP4T 400μA Supply Current
MAX4534EUD+T Applications
There are a lot of Maxim Integrated MAX4534EUD+T Analog Switches & Multiplexers ICs applications.
Relay replacements
Microwave transmission systems
SDH
Avionics
Communication systems
Residential Gateways, Home Gateway/Router
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads