MAX4544EPA Overview

The electrical component comes in 8-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. A 5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 8 pins. A SPDT switching circuit is used for these analog switches. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4544. Internally, this switch multiplexer has a resistance of 60Ohm. You can find the functions of the 8 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. 2.7V is the lowest voltage the electrical component should receive. Using a single voltage supply, this switch device consumes 2.7V~12V volts.

MAX4544EPA Features

1 Channels
Switch Circuit: SPDT

MAX4544EPA Applications

There are a lot of Maxim Integrated MAX4544EPA Analog Switches & Multiplexers ICs applications.

• Digital cross connects (DSX-1)
• Battery Powered Instruments
• Data switching
• Precision data acquisition
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Multi-Line E1 Interface Cards
• Cellular phones
• SONET/SDH ADM
• Avionics test equipment
• USB 1.1 signal switching circuits