MAX4580EAE Overview

As the electronic part is packed in 16-SSOP (0.209, 5.30mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NC switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with MAX4580 if you are looking for variants. There is 1.25Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. Dual, Single supply type digital switch with a low cost. A low voltage of 4.5V should be applied to the electronic component. If you put voltage higher than 500nA on the digital multiplexer, damage may occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A voltage of 15V can be used to operate the electronic component.

MAX4580EAE Features

2 Channels
Switch Circuit: SPST - NC

MAX4580EAE Applications

There are a lot of Maxim Integrated MAX4580EAE Analog Switches & Multiplexers ICs applications.

• Remote Powered Equipment
• ATM
• Video switching
• PBXs
• Digital Cross-Connects
• Public switching systems
• DSUs
• RGB switches
• Switching Systems
• Medical systems