MAX4602EPE Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used for these analog switches. There are 4 circuits in this switch device. Try searching with MAX4602 to find analog multiplexer variants. There is 2.5Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. A voltage higher than 500nA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIt is recommended that you attach at least 4.5V to your dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.

MAX4602EPE Features

1 Channels
Switch Circuit: SPST - NO

MAX4602EPE Applications

There are a lot of Maxim Integrated MAX4602EPE Analog Switches & Multiplexers ICs applications.

• Central office
• High speed data transmission line cards
• Sample-and-hold systems
• Battery-powered systems
• Medical systems
• Isolation
• PDAs
• New designs requiring multiplexer functions
• DSLAMs
• HDTV