65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-TSSOP (0.173, 4.40mm Width)
SOT-23
MAX4610EUD Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Number of Pins
14
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2007
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Resistance
100Ohm
Terminal Finish
Tin/Lead (Sn85Pb15)
Additional Feature
ALSO OPERATES AT 5V AND 12V VCC
Subcategory
Multiplexer or Switches
Max Power Dissipation
640mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
4
Supply Voltage
3V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
20
Base Part Number
MAX4610
Output
SEPARATE OUTPUT
Pin Count
14
Operating Supply Voltage
9V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
12V
Min Supply Voltage
2V
Operating Supply Current
1μA
Nominal Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
47 ns
Supply Type
Single
Turn-Off Delay Time
100 ns
-3db Bandwidth
300MHz
On-State Resistance (Max)
100Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
60 dB
Current - Leakage (IS(off)) (Max)
100pA
Channel Capacitance (CS(off), CD(off))
16pF 16pF
On-state Resistance Match-Nom
2Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
65ns, 28ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-80dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
90ns
Voltage - Supply, Single (V+)
2V~12V
Normal Position
NO
Height Seated (Max)
1.1mm
Length
5mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$3.435442
$3.435442
10
$3.240983
$32.40983
100
$3.057532
$305.7532
500
$2.884464
$1442.232
1000
$2.721192
$2721.192
MAX4610EUD Product Details
MAX4610EUD Overview
Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 14. This electronic part offers high-quality output due to its 1 channels. An 3V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 14 series that this electronic component is included. The analog switch ics are built using SPST - NO switching circuits. A total of 4 circuits make up this switch device. Try searching for MAX4610 variants of the analog switch ic. As far as internal resistance is concerned, it has 100Ohm. Please refer to the datasheets for 14 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 1μA. An analogue multiplexer drains from a single voltage supply at 2V~12V. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical part is compatible with 9V operating voltages. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4610EUD Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current -3db Bandwidth: 300MHz Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4610EUD Applications
There are a lot of Maxim Integrated MAX4610EUD Analog Switches & Multiplexers ICs applications.
Existing multiplexer applications (both fault-protected and nonfault-protected)