MAX4611CSD Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. Total terminations are 14. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. A total of 14 pins are injected into the body of the electronic part. A SPST - NC switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. Try searching with MAX4611 if you're looking for variants. This digital multiplexer has 100Ohm internal resistance. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. 1μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2V~12V. Put voltage above 1μA on the multiplexer to cause damage. Operating voltages range from 5V. Additional features include: ALSO OPERATES AT 5V AND 12V VCC.

MAX4611CSD Features

1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC

MAX4611CSD Applications

There are a lot of Maxim Integrated MAX4611CSD Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• DSLAMs
• SONET
• New designs requiring multiplexer functions
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Remote wireless modules
• Ultrasound
• Public switching systems
• Channel Banks