Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, 14 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. A SPST - NO/NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4612. In this multiplexer, the internal resistance is 100Ohm. You can find the functions of the 14 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 9V operating voltages. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4612CPD Features
1 Channels Switch Circuit: SPST - NO/NC 1μA Supply Current -3db Bandwidth: 300MHz Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4612CPD Applications
There are a lot of Maxim Integrated MAX4612CPD Analog Switches & Multiplexers ICs applications.
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads