Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around 0°C~70°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. SPST - NO/NC switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. MAX4613 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 70Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4613CSE+ Features
1 Channels Switch Circuit: SPST - NO/NC 1μA Supply Current
MAX4613CSE+ Applications
There are a lot of Maxim Integrated MAX4613CSE+ Analog Switches & Multiplexers ICs applications.