MAX4613ESE+T Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electrical component is included in the 16 series of products. The analog switch ics are built using SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 4. Using the MAX4613 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 70Ohm. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 40V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. A low voltage of 4.5V should be applied to the electronic component. This digital switch can be operated with a current of 1μA. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. 18V operating voltages are supported by the electronic component.

MAX4613ESE+T Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX4613ESE+T Applications

There are a lot of Maxim Integrated MAX4613ESE+T Analog Switches & Multiplexers ICs applications.

• Industrial and process control systems
• Cable Modem
• Digital Cross-Connects
• Audio and video switching
• Relay replacements
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• 65 V DACs
• New designs requiring multiplexer functions
• RGB switches
• Channel Banks