MAX4617CUE+ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 3.3V, it should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4617. The internal resistance of this digital multiplexer is 10Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. The analogue multiplexer could operate on 1μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. 5V operating voltages are supported by the electronic component.

MAX4617CUE+ Features

8 Channels
1μA Supply Current

MAX4617CUE+ Applications

There are a lot of Maxim Integrated MAX4617CUE+ Analog Switches & Multiplexers ICs applications.

• Digital access cross connects
• Intelligent PBX
• Channel Banks
• Video signal routing
• Audio and video switching
• Relay Replacement
• Automatic test equipment
• Routers
• DVD-R
• 65 V DACs