MAX4652EUE+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. A 3V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. Multiplexers built on a SPST - NO switching circuit are built. There are 4 circuits in this multiplexer. Try searching with MAX4652 to find analog multiplexer variants. This digital multiplexer has 7Ohm internal resistance. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. It would be sufficient to run this analogue multiplexer with 1μA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. The electronic component can function from 5V.

MAX4652EUE+ Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

MAX4652EUE+ Applications

There are a lot of Maxim Integrated MAX4652EUE+ Analog Switches & Multiplexers ICs applications.

• Microwave transmission systems
• Sample hold systems
• DSLAMs
• Communications systems
• Microprocessor Controlled Analog Systems
• PBX interfaces
• Wireless Local Loop
• Access Concentrators
• Avionics
• ATM