MAX4661CWE+ Overview

Due to its 16-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. Circuits based on SPST - NC switching are used to construct these analog switch ics. There are 4 circuits in this multiplexer. Search with MAX4661 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 2.5Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. A low voltage of 4.5V should be applied to the electronic component. When the digital multiplexer is charged above 500nA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 20VYou should attach at least 4.5V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

MAX4661CWE+ Features

1 Channels
Switch Circuit: SPST - NC

MAX4661CWE+ Applications

There are a lot of Maxim Integrated MAX4661CWE+ Analog Switches & Multiplexers ICs applications.

• Audio/video switches
• Automotive applications
• Automatic test equipment
• Central office
• Relay replacements
• Residential Gateways, Home Gateway/Router
• Avionics test equipment
• Switching Systems
• Data switching
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8