150ns, 100ns DPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG405 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG405DJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Weight
1.627801g
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
55Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
CMOS
Peak Reflow Temperature (Cel)
265
Number of Functions
2
Supply Voltage
15V
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
DG405
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
15V
Number of Channels
2
Number of Circuits
2
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
5μA
Nominal Supply Current
10nA
Power Dissipation
450mW
Max Supply Current
1μA
Throw Configuration
DPST, SPDT
Turn On Delay Time
150 ns
Number of Inputs
4
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
100 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
45Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
On-state Resistance Match-Nom
3Ohm
Switch Circuit
DPST - NO
Switch Time (Ton, Toff) (Max)
150ns, 100ns
Charge Injection
60pC
Crosstalk
-90dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
4.45mm
Length
19.43mm
Width
7.87mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
500
$2.82200
$1411
DG405DJ-E3 Product Details
DG405DJ-E3 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. A 2 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Multiplexers built on a DPST - NO switching circuit are built. The circuits in this analogue multiplexer number 2. Search with DG405 if you are looking for analog multiplexer variants. A 55Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 13V. The switch device would be able to operate with 5μA current. A voltage higher than 1μA may cause damage to the switch multiplexer. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. You should attach at least 7V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages range from 15V. In order to operate the 4 inputs, there are several steps to follow.
DG405DJ-E3 Features
2 Channels Switch Circuit: DPST - NO 5μA Supply Current
DG405DJ-E3 Applications
There are a lot of Vishay Siliconix DG405DJ-E3 Analog Switches & Multiplexers ICs applications.