MAX4685EUB+ Overview

Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there have been 10 terminations. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is injected into the electrical part body with 10 pins. A SPDT switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with MAX4685. The internal resistance of this digital multiplexer is 800mOhm. The datasheets for the 10 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. There should be 1.8V voltage fed to the electrical part below 1.8V. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 200nA on the digital multiplexer, damage may occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.

MAX4685EUB+ Features

2 Channels
Switch Circuit: SPDT

MAX4685EUB+ Applications

There are a lot of Maxim Integrated MAX4685EUB+ Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Avionics test equipment
• T1/E1 Terminals
• Precision data acquisition
• Cable PC
• Relay replacements
• Optical Applications
• Voice over IP/DSL – Integrated Access Devices, Smart
• Access Concentrators
• Automotive applications