MAX4691ETE+T Overview

Due to its 16-WQFN Exposed Pad packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 8:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. This electronic part offers high-quality output due to its 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with MAX4691. There is 70Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 11V voltage to the switch device. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 2V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. You should attach at least 2V voltage if you are using dual power supply.

MAX4691ETE+T Features

8 Channels

MAX4691ETE+T Applications

There are a lot of Maxim Integrated MAX4691ETE+T Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Optical Applications
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Multiplexers
• Imaging
• Microprocessor Controlled Analog Systems
• Audio and video routing
• SONET/SDH ADM
• Mechanical reed relay replacement
• Digital cross connects (DSX-1)