MAX4704EUB+T Overview

Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 10 terminations. By its 4 channels, the electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 10 pins. Multiplexers built on a SP4T switching circuit are built. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MAX4704. Internally, this switch multiplexer has a resistance of 60Ohm. Datasheets for functions of 10 pins are available. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. For this digital switch to work, 1μA current would suffice. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. Operating voltages of 5V are compatible with the electrical part. The transfer of data can be performed over 200MHz bandwidths.

MAX4704EUB+T Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 200MHz

MAX4704EUB+T Applications

There are a lot of Maxim Integrated MAX4704EUB+T Analog Switches & Multiplexers ICs applications.

• Optical Applications
• Remote Powered Equipment
• Video switching
• Audio and video switching
• Digital access cross connects
• Microwave transmission systems
• Relay Replacement
• Routers
• Ultrasound
• Fault Tolerant Systems