MAX4714ELT+T Overview

The electronic component is convenient to ship overseas because it is packed in a 6-WFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. Electronic part bodies are injected with 6 pins. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. MAX4714 can be used to search for analog multiplexer variants. It has an internal resistance of 800mOhm. For details about the functions of 6 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 3.6V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.6V voltage fed to the electrical part below 1.6V. For this multiplexer to operate, 40nA current would be sufficient. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~3.6V. A digital multiplexer may suffer damage if voltage is applied above 200nA. There is a voltage range of 3V operating voltages for the electrical part.

MAX4714ELT+T Features

1 Channels
Switch Circuit: SPDT
40nA Supply Current

MAX4714ELT+T Applications

There are a lot of Maxim Integrated MAX4714ELT+T Analog Switches & Multiplexers ICs applications.

• Cellular phones
• Mechanical reed relay replacement
• Ultrasound
• Industrial control systems
• E1 Multiplexer
• High speed data transmission line cards
• Fault Tolerant Systems
• Communication systems
• Data Acquisition Systems
• ISDN NT1/TA