MAX332CPE Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around 0°C~70°C TA. The total number of terminations is 16. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Circuits based on SPST - NO switching are used to construct these analog switch ics. A total of 4 circuits make up this switch device. Search with MAX332 if you are looking for analog multiplexer variants. It has an internal resistance of 175Ohm. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. An effective Dual supply digital multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. If put voltage greater than 100μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic.

MAX332CPE Features

Switch Circuit: SPST - NO

MAX332CPE Applications

There are a lot of Maxim Integrated MAX332CPE Analog Switches & Multiplexers ICs applications.

• Cross Connects
• Audio and video switching
• PCMCIA cards
• ATM
• Private Branch Exchange (PBX)
• Relay Replacement
• Communication systems
• Sample-and-hold systems
• Communications systems
• Microwave transmission systems