80nA 72 dB Instrumentational OP Amps 2.7V~5.25V ±1.35V~2.625V MAX474 8 Pins 8-DIP (0.300, 7.62mm)
SOT-23
MAX474EPA Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Surface Mount
NO
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
1995
JESD-609 Code
e0
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Subcategory
Operational Amplifier
Technology
BIPOLAR
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
240
Number of Functions
2
Supply Voltage
5V
Reach Compliance Code
not_compliant
[email protected] Reflow Temperature-Max (s)
20
Base Part Number
MAX474
Pin Count
8
JESD-30 Code
R-PDIP-T8
Qualification Status
Not Qualified
Output Type
Rail-to-Rail
Power Supplies
3/5V
Number of Circuits
2
Current - Supply
2mA
Slew Rate
17V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
72 dB
Current - Input Bias
80nA
Voltage - Supply, Single/Dual (±)
2.7V~5.25V ±1.35V~2.625V
Gain Bandwidth Product
12MHz
Unity Gain BW-Nom
12000 kHz
Low-Offset
NO
Frequency Compensation
YES
Supply Voltage Limit-Max
7V
Voltage - Input Offset
700μV
Bias Current-Max (IIB) @25C
0.15μA
Voltage Gain-Min
3981.1
Length
9.375mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
MAX474EPA Product Details
MAX474EPA Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. For this electrical component, the recommended mounting type is Through Hole, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In total, there are 2 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a recommendation, this electronic component should be used with a power supply that can deliver 2mA. This operational amplifier can conduct a voltage gain of up to 3981.1 at a minimum.
MAX474EPA Features
8 Pins supply voltage of 5V Output Type: Rail-to-Rail
MAX474EPA Applications
There are a lot of Maxim Integrated MAX474EPA Instrumentational OP Amps applications.