MAX4752EUD+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 14 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 14 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A total of 4 circuits make up this switch device. Search with MAX4752 if you are looking for analog multiplexer variants. It has an internal resistance of 900mOhm. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Single supply type digital switch with a low cost. 1.6V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 3V operating voltages for the electrical part.

MAX4752EUD+T Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

MAX4752EUD+T Applications

There are a lot of Maxim Integrated
MAX4752EUD+T Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems