MAX4784EUE+ Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. A 2 channel electronic part produces high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. Multiplexers built on a SPDT switching circuit are built. It consists of 4 circuits. Try searching with MAX4784 to find analog multiplexer variants. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage of 1.6V~4.2V is required to drain this analog switch from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.

MAX4784EUE+ Features

2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 123MHz

MAX4784EUE+ Applications

There are a lot of Maxim Integrated MAX4784EUE+ Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• DSUs
• Data Acquisition Systems
• DSLAMs
• Data switching
• Audio signal routing
• Voice over IP/DSL – Integrated Access Devices, Smart
• Signal routing between systems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Access Concentrators