3nA 90 dB Instrumentational OP Amps 0.008μA 12V 3V~30V ±1.5V~15V MAX479 14 Pins 14-DIP (0.300, 7.62mm)
SOT-23
MAX479EPD Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
14-DIP (0.300, 7.62mm)
Operating Temperature
-40°C~85°C
Packaging
Tube
Published
1999
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Subcategory
Operational Amplifier
Technology
CMOS
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
240
Number of Functions
4
Supply Voltage
15V
Reach Compliance Code
not_compliant
Time@Peak Reflow Temperature-Max (s)
20
Base Part Number
MAX479
Pin Count
14
Qualification Status
Not Qualified
Operating Supply Voltage
12V
Power Supplies
3/+-15V
Number of Circuits
4
Operating Supply Current
17μA
Nominal Supply Current
84μA
Slew Rate
0.04V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
90 dB
Current - Input Bias
3nA
Voltage - Supply, Single/Dual (±)
3V~30V ±1.5V~15V
Input Offset Voltage (Vos)
100μV
Gain Bandwidth Product
85kHz
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
85 kHz
Voltage Gain
116.9dB
Average Bias Current-Max (IIB)
0.008μA
Low-Offset
YES
Frequency Compensation
YES
Supply Voltage Limit-Max
22V
Micropower
YES
Bias Current-Max (IIB) @25C
0.006μA
Length
19.05mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
MAX479EPD Product Details
MAX479EPD Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 17μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. The operating supply voltage of the buffer op amp is rated at 12V.
MAX479EPD Features
14 Pins supply voltage of 15V 116.9dB voltage gain
MAX479EPD Applications
There are a lot of Maxim Integrated MAX479EPD Instrumentational OP Amps applications.