MAX487MJA Overview
Designed for common LEDs, this driver IC features an enhanced CDIP package.An output voltage range of 5V is sufficient to run this line driver ic efficiently.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.It is a 8-pin driver IC with enhanced power dissipation controls.An important feature of this ic receiver was its 1-bit resolution capability.Typically, the resolution of this receiver is specified to be 1 bits.There is a supply voltage of 5.25V on the input of this transceiver module, so it can be operated from that source.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.A transceiver module's temperature less than 70°C must be used for operation.There must not be a minimum operating temperature of 0°C for this optical transceiver.1 transmitters are present, which produce radio waves for the purpose of transmitting or sending data.The device is capable of delivering voltage at 12.5V.
MAX487MJA Features
8 pin count
8 pins
5V power supply
MAX487MJA Applications
There are a lot of Maxim Integrated MAX487MJA Drivers/Receivers/Transceivers applications.
- WDM transmission
- Transmission stations
- Tuner
- Laser diode bonding
- IP cameras
- IPTV front end
- Carrier phase observations
- Notebook
- Wireless smart house
- SONET/SDH Network
