Shipping overseas is convenient with the electronic component packed in 10-UFQFN. In order to provide high reliability, an advanced packaging method Strip is used. A switch device like this is mounted in Surface Mount. 2:2 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 10 terminations totally. The electronic part delivers high-quality output through its 2 channels. Powered by a 2.7V voltage supply, the electrical part should be switched on and run. A total of 10 pins are injected into the electrical part body. The analog switch ics are built using DPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching for MAX4993 variants of the analog switch ic. There is 500mOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 10 pins functions. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.8V. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 6μA on the multiplexer may cause damage. There are SEPARATE OUTPUT outputs on this analog switch ic.
MAX4993EVB+ Features
2 Channels Switch Circuit: DPDT
MAX4993EVB+ Applications
There are a lot of Maxim Integrated MAX4993EVB+ Analog Switches & Multiplexers ICs applications.