MAX5037AEMH-T Overview

With a 44-QFP package, the switching controller is suitable for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 4.75V~28V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. It can switch at 250kHz 500kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Enable, Phase Control, Power Good which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at QUAD . Different dc switching's functions can be applied to 44 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 5V volts. Searching "MAX5037" will return other relevant dc to dc converter ics. There are a total of 44 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.75V. The test statistics indicate that DC regulator outputs a voltage of 1.85V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. A starting point for a project is to note down the dc dc regulator's usual output current, which is 4A. DC switcher's Surface Mount qualifies it for most applications and prototypes. Users should apply 28V to operate the voltage regulator dc to dc safely and reliably.

MAX5037AEMH-T Features

Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable, Phase Control, Power Good
PULSE WIDTH MODULATION

MAX5037AEMH-T Applications

There are a lot of Maxim Integrated MAX5037AEMH-T DC to DC converter applications.

• Electric water heaters
• Mobile phones
• Electrical power transmission
• seismic instrument power circuits
• Constant current circuits
• Remotely powered electric motors
• Sensitive electronic devices
• Servo drive system
• Alternators
• Gear/thread machining machines