MAX5939FESA+ Overview

In the 8-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.The supply voltage 48V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Fault Timeout, Latched Fault, Thermal Limit describes it.Using a -80V~-20VV power source should be able to power the device.The MAX5939 family includes it.During operation, 8 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, OVP, UVLO programmable features.Presently, there is a sufficient supply of 700μA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 20V so that the device can function normally.The maximum supply current it requires to operate is 2mA.

MAX5939FESA+ Features

The terminal position of 8
Features of Fault Timeout, Latched Fault, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, OVP, UVLO

MAX5939FESA+ Applications

There are a lot of Maxim Integrated
MAX5939FESA+ hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems