MAX5956BUEE+ Overview

In the 16-SSOP (0.154, 3.90mm Width) package you will find it.Channel 2 is currently available.A Tube-shaped package holds it.The 16 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Monitor.A reliable operation requires the temperature to be set to 0°C~85°C.Apps for General Purpose are available on the device.A feature of Latched Fault describes it.Using a 1V~13.2VV power source should be able to power the device.The MAX5956 family includes it.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout programmable features.Presently, there is a sufficient supply of 1.2mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 1V so that the device can function normally.There is an electrical component in this series called VariableSpeed/BiLevel™.

MAX5956BUEE+ Features

The terminal position of 16
Features of Latched Fault
Programmable features of Circuit Breaker, Current Limit, Fault Timeout
VariableSpeed/BiLevel™ series

MAX5956BUEE+ Applications

There are a lot of Maxim Integrated
MAX5956BUEE+ hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems