MAX5974BETE+ Overview

With its 16-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.4V~26V and has a 8.4V~26V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 100kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Enable, Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "MAX5974" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 82 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 600kHz on this dc regulators. This value is ALSO HAS CONTROL MODE OF IPK so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 21V to ensure safety and reliability. There is 1.8mA supply current for it.

MAX5974BETE+ Features

Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 82 %
ALSO HAS CONTROL MODE OF IPK

MAX5974BETE+ Applications

There are a lot of Maxim Integrated
MAX5974BETE+ DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots