UC3841NG4 Overview
In the PDIP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. It can switch at 500kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 18 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. There are 18 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Voltage regulator dc to dc is designed to operate at 95 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 450kHz is set for the switching controller. Hence, CURRENT MODE OPERATION IS ALSO POSSIBLE is used to better suit the DC to DC voltage regulator's situation. You should keep dc regulator at 0°C degrees or higher. There should be 70°C temperature above 70°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 18 pins. Switching can take place at a maximum frequency of 500kHz. It is possible to set the input voltage as 30V for nominal working statuses. This is an ideal solution for switching controllers with 400mA inputs. During normaloperations, it outputs a value of 40V.
UC3841NG4 Features
Switching Frequency: 500kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 450kHz
CURRENT MODE OPERATION IS ALSO POSSIBLE
UC3841NG4 Applications
There are a lot of Texas Instruments
UC3841NG4 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
