MAX6355SVUT+T Overview

There are 6 mounting terminals on the voltage supervisor, each of which has a different function. There is a Strip-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. In a 3 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There are a total of 6 pins on power management. There are 6 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 20μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0].

MAX6355SVUT+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
20μA operating supply current

MAX6355SVUT+T Applications

There are a lot of Maxim Integrated MAX6355SVUT+T Voltage Supervisors applications.

• Dash board
• DSP
• Consumer electronics
• Set top box
• Leakage current detection
• Power distribution systems of operating room
• Analog circuit
• DVR
• Power distribution systems of infant care room
• Microprocessor system