MAX6375XR30+T Overview
It is mounted through 3 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3V. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 3 pins on IC management. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 1μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6375, the base power ics number.
MAX6375XR30+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6375XR30+T Applications
There are a lot of Maxim Integrated MAX6375XR30+T Voltage Supervisors applications.
- Power communication system
- Detection of phase loss
- FPGA design
- emergency room
- Precision measurement
- Detection of phase imbalance
- Consumer electronics
- Unattended substation automation
- Transformer load monitoring equipment
- Solar power charger
