MAX6381LT30D2+T Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 6-WFDFN functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1.8V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 6 pins on power management. 6 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.

MAX6381LT30D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6381LT30D2+T Applications

There are a lot of Maxim Integrated MAX6381LT30D2+T Voltage Supervisors applications.

• Medical-specific insulation monitor
• Low voltage/high power - AI, GPU
• Military communications
• WiFi router
• Embedded computing
• Detection of phase imbalance
• DC stabilized power supply module
• Display equipment
• Network equipment
• Dash board