MAX6382LT17D3+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for 6-WFDFN functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6382, which is the base power ics number.

MAX6382LT17D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

MAX6382LT17D3+T Applications

There are a lot of Maxim Integrated MAX6382LT17D3+T Voltage Supervisors applications.

• Transformer load monitoring equipment
• Insulation fault location system
• Linux and server computing
• Medical-specific isolation transformer
• Consumer electronics
• Electric heating appliances
• Urban rail transit weak current power monitoring
• Analog circuit
• Power distribution systems of ICU
• Dash board