MAX6389XS23D3-T Overview

Power management is mounted through 4 terminals. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. This power management is made up of 2 channels which are available in a series format. Please refer to power management for SC-82A, SOT-343 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 245 for the package during reflow. Manage ics operate at 1.8V supply voltages. A supply voltage of 2 is used to conduct the PMIC chip. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 4 pins are located on this power management. 4 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6389, the base power ics number.

MAX6389XS23D3-T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current

MAX6389XS23D3-T Applications

There are a lot of Maxim Integrated MAX6389XS23D3-T Voltage Supervisors applications.

• Smartphones
• Smart meter
• External alarm
• Low voltage/high power - AI, GPU
• Insulation fault location system
• Household appliances
• Detection of phase imbalance
• Fire equipment power monitoring system
• Battery cars
• Electronics installed in the vehicle