MAX6406BS29+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a 4-WFBGA, CSPBGA package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3V. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 4 pins on IC management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 1μA. You can always use MAX6406, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6406BS29+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6406BS29+T Applications

There are a lot of Maxim Integrated MAX6406BS29+T Voltage Supervisors applications.

• Dash board
• Precision measurement
• External alarm
• Rechargeable batteries
• Display equipment
• Detection of phase loss
• Battery cars
• Utility meter
• Automotive power systems
• Refrigeration